jedyne do czego mogę mieć zastrzeżenie to jakość zdjęć zawartych w przesłanej instrukcji serwisowej ponieważ są fatalnej jakości, praktycznie nieczytelne. tak poza tym jestem zadowolony to jest to czego szukałem.
Wszystko w porządku.
Instrukcja czytelna i kompletna.
Dziękuję.
all right!
thank you.
Tekstowy podgląd strony 149 (kliknij aby zobaczyć)
Tray 2 pickup roller
NOTE Also follow these instructions to remove any optional-tray pickup rollers. 1. Rotate the bushings (callout 1) on each side of the roller.
Figure 6-59.
Removing the tray 2 pickup roller (1 of 2) 2. Remove the left-side bushing by sliding the bushing to the left. 3. Slide the roller and shaft toward the left until they clear the hole in the right-side bushing, and then lift the right end of the shaft.